The cut to size deisgn on the 37660 enables it to fit most cars which in turn reduces the amount of CV boots that are needed to be stocked. As well as this the design of the boot allows for superior flexibility which minimalises wear and tear especially when the vehicle is on full lock. Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box.Can be fitted using the conventional cone method Laser Part No 2971 or using our innovative tool Laser Part No 4806 air driven gun.
- Cut to size CV Boot. Universal fitting.
- Fits shaft: ø 18-26mm, joint: ø 56-116mm, length: 58-128mm.
- Kit contains: CV Boot, grease sachet, small and large CV Boot clips.
- Resistant to: oil, grease, grit, abrasion, extremes of temperature, tearing and impact damage.
- Made in the UK.
TSP:
£15.25 ex VAT £18.30 inc VAT
The cut to size deisgn on the 37660 enables it to fit most cars which in turn reduces the amount of CV boots that are needed to be stocked. As well as this the design of the boot allows for superior flexibility which minimalises wear and tear especially when the vehicle is on full lock. Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box.Can be fitted using the conventional cone method Laser Part No 2971 or using our innovative tool Laser Part No 4806 air driven gun.
- Soufflet de cardan coupé à dimension - installation universelle
- Convient pour des axes ø 18-26mm, Cardan : ø 56-116mm, Longueur : 58-128mm.
- Le kit contient : Le soufflet, un sachet de graisse, un petit et un long collier de serrage pour soufflet.
- Résistant à l'huile, la graisse, l'abrasion, des températures extrêmes ainsi que l'usure et les endommagements dues à des impacts
- 1 pc
TSP:
£15.25 ex VAT £18.30 inc VAT
The cut to size deisgn on the 37660 enables it to fit most cars which in turn reduces the amount of CV boots that are needed to be stocked. As well as this the design of the boot allows for superior flexibility which minimalises wear and tear especially when the vehicle is on full lock. Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box.Can be fitted using the conventional cone method Laser Part No 2971 or using our innovative tool Laser Part No 4806 air driven gun.
- Op maat snijdbare hoes voor homokineet. Universeel model.
- Past op as: ø 18-26mm, koppeling: ø 56-116 mm, lengte: 58-128 mm.
- Set bevat: Hoes voor homokineet, zakje vet, grote en kleine klemmen voor hoes van homokineet.
- Bestand tegen: olie en vet, gruis, schuren, extreme temperaturen, scheuren en botsingen.
- Vervaardigd in het VK.
TSP:
£15.25 ex VAT £18.30 inc VAT